Disclaimer

SAFETY INSTRUCTIONS AND CONDITIONS OF USE

Disclaimer

Extreme Sports is a dangerous activity and should only be attempted when all relevant safety measures have been considered. Jumpack advises that participants should always wear personal safety equipment including approved helmet and pads before engaging in activity. Given the inherent dangers and injuries associated with participating in Extreme Sports, Jumpack can accept no responsibility for injuries resulting from learning or engaging in this activity. By continuing to use this product, Jumpack assumes the customers understanding of this statement.

Who Can Use It?

Users; Skateboard  / BMX / MTB / E-bike / Inline Skate / Scooter / Snow Board /  Mountain board & Ski (requires 2 connected)

Educational purposes - Home use / single location without requirement for transportation. Kids aged 8 yrs and up.

Educational purposes and transportation to location for use – Although designed to be carried by the user, users under the age of 12 years may find 6kg heavy to carry for long periods. It is advised that parents should not allow their young children to carry this product unless they are certain that their child is capable, and comfortable carrying this weight.

User Weight - Jumpack recommends a maximum user weight of up to 100kg / 220 lbs plus equipment.

How To Use It

Warranty & Returns

Jumpack is purely a launch or take-off ramp. It is not designed to handle the impact and stress profile of a landing ramp. Using Jumpack as a landing ramp may lead to damage to parts.

Jumpack has a unique deployment procedure; deviation from this procedure can result in damage to the working parts of the product. Please see product instructions on packaging before attempting to deploy for the first time.However, replacement parts are readily available if required. 

If separating the Jumpack down into a 2 or single stage setting, please ensure when reattaching that connecting bolts are on the correct thread before tightening. DO NOT OVER TIGHTEN THESE BOLTS, A SLIGHT 'NIP' IS SUFFICIENT.

When deploying the ramp, the large and middle support legs can be allowed to open automatically under the pressure of the gas strut. If doing this, please ensure that hands and fingers are kept clear of the leg pivot points to avoid potential nips or injury.

 

Grip & Positioning

When in use, always ensure that the Jumpack is positioned on level ground with all foot & grip pads contacting naturally with the ground.

The foot & grip pads that contact with the ground are molded from a soft rubber compound to ensure great grip on all surfaces. Like tyres and shoes, these will wear over time and will need to be replaced at intervals to maintain optimum grip and slide resistance.

Do not use a Jumpack with missing grip or damaged foot pads as this could potentially result in the ramp sliding during use and potential injury.

Jumpack is designed to be used in all conditions, however, tire or wheel compound can greatly influence grip levels for different users. Always test your grip levels in wet conditions before going big.

When using on snow, the foot pads can be pushed a few centimetres into the snow to lock the ramp into position.

 

Maintenance

 Some parts including foot & grip pads, gas struts, leg check straps; are engineered to be replaced when damaged, stretched or worn. Check your ramp regularly for signs of wear and tear, if you suspect a part, or parts of the ramp are no longer in optimum condition, cease using the ramp immediately and order replacement parts. 

 

Replacement Parts

If you require replacement parts, please contact us at phil@jumpack.com